Replacing the solid-state driveWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.CAUTION: Solid-state drives are fragile. Exercise care when handling thesolid-state drive.Procedure1 Align the notches on the solid-state drive with the tabs in the solid-state driveslot, then slide the solid-state drive at an angle into the solid-state drive slot.2 Slide the solid-state drive shield into the solid-state drive shield slot. Then alignthe screw hole on the solid-state drive shield and solid-state drive to the screwhold on the system board.23
