Replacing the headset portNOTE: Before working inside your computer, read the safety information that shipped with your computer and followthe steps in Before working inside your computer. After working inside your computer, follow the instructions in Afterworking inside your computer. For more safety best practices, see the Regulatory Compliance home page atwww.dell.com/regulatory_compliance.Procedure1. Place the headset port in its slot on the palm-rest assembly.2. Replace the screw (M1.6x3) that secures the headset port to the palm-rest assembly3. Reconnect the headset-port cable to the system board.4. Using the alignment posts, press the right display hinge down on the palm-rest assembly aligning the screw holes on the display hingeto the screw holes on the palm-rest assembly.5. Replace the two screws (M2.5x4) that secure the display assembly to the palm-rest assembly.Post-requisitesReplace the base cover.1830 Replacing the headset port
