Removing the solid-state drive (half-length)WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow thesteps in Before working inside your computer. After working inside your computer, follow the instructions in After working insideyour computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Topics:• Prerequisites• ProcedurePrerequisites1 Remove the base cover.2 Remove the battery (half-length) or the battery (full-length).Procedure1 Remove the screw (M2x3) that secures the solid-state drive assembly to the system board.2 Lift and slide the solid-state drive assembly from the system board.Figure 11. Removing the solid-state drive assembly1 screw 2 solid-state drive assembly13Removing the solid-state drive (half-length) 27
