Replacing the solid-state drive (full-length)WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow thesteps in Before working inside your computer. After working inside your computer, follow the instructions in After working insideyour computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Topics:• Procedure• Post-requisitesProcedure1 Adhere the thermal pad to the solid-state drive.2 Slide the solid-state drive assembly at an angle into the solid-state drive slot.3 Press the other end of the solid-state drive down and replace the screw (M2x3) that secures the solid-state drive to the systemboard.Post-requisites1 Replace the battery (half-length) or the battery (full-length).2 Replace the base cover.1632 Replacing the solid-state drive (full-length)
