Replacing the solid-state drive(full-length)WARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.CAUTION: Solid-state drives are fragile. Exercise care when handling thesolid-state drive.Procedure1 Adhere the thermal pad to the solid-state drive.2 Slide the solid-state drive at an angle into the solid-state drive slot.3 Press the other end of the solid-state drive down and replace the screw thatsecures the solid-state drive to the system board.Post-requisites1 Replace the battery.2 Replace the base cover.31
