Replacing the power-adapterportWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Procedure1 Place the power-adapter port into the slot on the palm-rest assembly.2 Route the power-adapter port cable through its routing guides on the palm-restassembly.3 Replace the screw that secures the power-adapter port to the palm-restassembly.4 Connect the power-adapter port cable to the system board.Post-requisites1 Replace the display assembly.2 Replace the battery.3 Replace the base cover.75
