Identifier GUID-740BADE7-E98C-41E6-A2C7-D807C0482F9AStatus ReleasedRemoving the palm-rest assemblyWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow thesteps in Before working inside your computer. After working inside your computer, follow the instructions in After working insideyour computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Identifier GUID-476C3863-8DEB-42A4-B59B-589BBE094817Status ReleasedPrerequisitesNOTE: Remove the SD card before removing the palm-rest assembly to avoid damage to the SD card.1 Remove the base cover.2 Remove the battery (half-length) or the battery (full-length).3 Remove the memory modules.4 Follow the procedure from step 1 to step 4 in “Removing the hard drive”.5 Remove the solid-state drive (half-length) or the solid-state drive (full-length).6 Remove the speakers.7 Remove the wireless card.8 Remove the fans.9 Remove the heat sink.10 Remove the system-board assembly.11 Remove the keyboard.12 Remove the fingerprint reader daughter-board (optional).13 Remove the display assembly.14 Remove the power-adapter port.Identifier GUID-66890565-CDD9-4FE0-9191-510485D7F3ACStatus ReleasedProcedureAfter performing the steps in the prerequisites we are left with the palm-rest assembly.4584 Removing the palm-rest assembly
