Table 6. System setup options—Integrated Devices menu(continued)Integrated DevicesEnable Fingerprint Reader Single Sign On Enables or disables the Fingerprint Reader Single Sign On capability.By default, Enable Fingerprint Reader Single Sign On is selected.Table 7. System setup options—Storage menuStorageSATA Operation Configures operating mode of the integrated SATA hard drive controller.Default: RAID On. SATA is configured to support RAID (Intel Rapid RestoreTechnology).Storage InterfacePort Enablement Enables the selected onboard drives.• SATA-4Default: ON• M.2 PCIe SSD-0Default: ON• M.2 PCIe SSD-1Default: ONDrive Information Displays the information of various onboard drives.Enable SMART Reporting Enables or disables Self-Monitoring, Analysis, and Reporting Technology (SMART).Default: OFFEnable MediaCard Enables to switch all media cards On/Off or set the media card to read-only state.By default, Enable Secure Digital (SD) Card is selected.Table 8. System setup options—Display menuDisplayDisplay BrightnessBrightness on battery power Sets the screen brightness when the computer is running on battery power.Default: 50Brightness on AC power Sets the screen brightness when the computer is running on AC power.Default: 0Touch Screen Enables or disables the touch screen for the OS.NOTE: The touch screen will always work in the BIOS setup irrespectiveof this setting.Full Screen Logo Enabled or disabled the computer to display full screen logo if the image matchscreen resolution.Default: OFFDirect Graphics Controller DirectOutput ModeWhen enabled, all graphics output ports directly to the Graphics Processing Unit(GPU), bypassing Intel Integrated graphics outputs for HDMI, Thunderbolt, and mDPports.Default: OFFSystem setup 61