3. Disconnect the power and hard drive cables from the drive.4. Press in on the tabs on each side of the drive and slide the drive up and out.Installing a Hard Drive1. Follow the procedures in Before You Begin.2. Remove the computer cover (see Removing the Computer Cover).3. Unpack the replacement hard drive, and prepare it for installation.4. Check the documentation for the drive to verify that the drive is configured for your computer.5. If your replacement hard drive does not have the hard drive bracket attached, remove the bracket from the old hard drive by unsnapping it from thedrive.6. Snap the hard drive bracket onto the replacement hard drive.7. Install the hard drive into the computer by sliding the drive into place until you feel it click into place.8. Connect the power and hard drive cables to the hard drive.1 power cable 2 hard drive cable1 tabs (2) 2 hard drive1 hard drive 2 hard drive bracket
