Dell XPS 430 Service Manual

Also see for XPS 430: User guide Quick reference guide Setting up Service manual

SystemSystem Info Lists system information such as the system modelnumber, the BIOS version number and date, thesystem service tag, express service code and assettag, and other system-specific information.Processor Info Identifies the processor type, clock speed, busspeed, L2 cache, L3 cache, ID, and whether theprocessor is multiple core capable, supports Hyper-Threading and supports 64-bit technology.Memory Info Identifies the memory type, speed, and channelmode (dual or single) by DIMM slot location.PCI Info Indicates the expansion card type by slot location.Date/Time Displays current date and time settings.Boot Sequence The computer attempts to boot from the sequence ofdevices specified in this list.NOTE: If you insert a boot device and restart thecomputer, this option appears in the system setupmenu. To boot from a USB memory device, forexample, select the USB device and move it so that itbecomes the first device in the boot sequence.DrivesSATA Drives 0 through 4(On default)Enables or disables drives attached to the SATAconnectors on the system board.l Off — A device attached to the interface is notusable.l On — A device attached to the interface isusable.eSATA(On default)Enables or disables eSATA.l Off — eSATA is disabled.l On — eSATA is enabled.NOTE: eSATA is not supported in ATA mode.SATA Operation(RAID On default)Enables or disables RAID (for more information, seethe Dell Technology Guide).l RAID Autodetect/ATA — RAID if signed drives,otherwise ATA.l RAID On — SATA is configured for RAID onevery boot.Onboard DevicesIntegrated NIC(On default)Enables or disables the integrated network interfacecontroller (NIC).l Off — The integrated NIC is disabled.l On — The integrated NIC is enabled.l On w/PXE — The integrated NIC is on (withPXE enabled).NOTE: PXE is required only if you are booting to anoperating system located on another computer. If aboot routine is not available from the remote system,the computer attempts to boot from the next devicelisted in the boot sequence.Integrated Audio(Auto default)Enables or disables the onboard audio controller.l Off — Integrated audio is disabled.l On — Integrated audio is enabled.l Auto — If installed, the add-in audio controlleris enabled.USB Controller(On default)Enables or disables the internal USB controller. Set toOn (default) so that USB devices will be detected andsupported in the operating system.l Off — The USB controller is disabled.l On — The USB controller is enabled.l No Boot — The USB controller is enabled;