Removing a CD/DVD Drive1. Follow the procedures in Before You Begin.2. Remove the computer cover (see Removing the Computer Cover).3. Remove the drive panel (see Removing the Drive Panel).4. Disconnect the power and data cables from the back of the drive.5. Slide the drive release latch towards the base of the computer to release the shoulder screw, and then slide the CD/DVD drive out of the drive bay.6. Replace the drive panel (see Replacing the Drive Panel).7. Replace the computer cover (see Replacing the Computer Cover).NOTE: If you are uninstalling your only CD/DVD drive and will not replace it at this time, disconnect the data cable from the system board and setit aside.1 data cable 2 power cable1 drive release latch 2 CD/DVD driveNOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
