14. Enter system setup (see System Setup) and select the appropriate Drive option.Replacing a Media Card Reader1. Follow the procedures in Before You Begin.2. Remove the computer cover (see Replacing the Computer Cover).3. Remove the drive panel (see Replacing the Drive Panel).4. Disconnect the cable from the back of the Media Card Reader.5. Slide the drive release latch towards the base of the computer to release the shoulder screw, and then slide the media card reader out of the drive bay.6. If no screws are attached to the new Media Card Reader, check the inside of the drive panel for shoulder screws. If screws are present, attach thescrews to the new card reader.1 media card reader cable1 drive release latch 2 media card reader