Removing the graphics card(optional)WARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps inBefore working inside your computer. After working inside yourcomputer, follow the instructions in After working inside yourcomputer. For more safety best practices, see the RegulatoryCompliance home page at www.dell.com/regulatory_compliance.Prerequisites1 Remove the computer cover.2 Remove the graphics-card bracket.Procedure1 Remove the screw that secures the card-retention bracket to the chassis.2 Lift and slide the card-retention bracket out of the chassis.NOTE: Your graphics card may have power-cable connectors.3 Press the releasing clip on the power-cable connectors and disconnectthe power cables from the graphics card, if applicable.4 Locate the graphics card (SLOT1 or SLOT4) on the system board andmake note of the graphics-card slot.For more information, see “System-board components”.NOTE: The appearance of the securing tab may be different on yourcomputer.33