Dell XPS L701X Service Manual

Also see for P09E: Setup guide

Great user manuals database on UserManuals.infoBack to Contents PageMXM-Assembly Fan (Optional)Dell™ Inspiron™ One 2305/2310 Service ManualRemoving the MXM-Assembly FanReplacing the MXM-Assembly FanRemoving the MXM-Assembly Fan1. Follow the instructions in Before You Begin.2. Remove the back cover (see Removing the Back Cover).3. Follow the instructions from step 2 to step 5 in Removing the Front Stand.4. Remove the system-board shield (see Removing the System-Board Shield).5. Disconnect the MXM-assembly fan cable from the connector (MXM FAN) on the system board.6. Remove the two screws that secure the MXM-assembly fan to the hex nut screws.7. Carefully peel the silver foil from the MXM-assembly heat sink.8. Lift the MXM-assembly fan along with its cable away from the system board.Replacing the MXM-Assembly Fan1. Follow the instructions in Before You Begin.2. Align the screw holes on the MXM-assembly fan with the screw holes screw holes on the hex nut screw.3. Adhere the silver foil to the MXM-assembly heat sink.4. Replace the two screws that secure the MXM-assembly fan to the system board.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™is not covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer).NOTE: The appearance of the system board may vary based on your computer model.1 MXM-assembly fan 2 screws (2)3 MXM-assembly fan cable