4. Press to confirm the deletion of the RAID volume.5. Press to exit the Intel RAID Option ROM utility.Configuring for RAID Using the Intel Matrix Storage ManagerIf you already have one hard drive with the operating system installed on it, and you want to add a second hard drive and reconfigure both drives into a RAIDvolume without losing the existing operating system and any data, you need to use the migrating option (see Migrating to a RAID Level 0 or a RAID Level 1Configuration).Deleting a RAID Volume1. Click the Start button and point to All Programs® Intel Matrix Storage Manager ® Intel Matrix Storage Console to launch the Intel Storage Console.2. Right-click the Volume icon of the RAID volume you want to delete, and select Delete Volume.3. On the Delete RAID Volume Wizard screen, click Next.4. Highlight the RAID volume you want to delete in the Available box, click the right-arrow button to move the highlighted RAID volume into the Selectedbox, and then click Next.5. Click Finish to delete the volume.Migrating to a RAID Level 0 or a RAID Level 1 Configuration1. Set your computer to RAID-enabled mode (see page 113).2. Click the Start button and point to All Programs® Intel Matrix Storage Manager ® Intel Matrix Storage Console to launch the Intel Storage Console.3. On the Actions menu, select Create RAID Volume From Existing Hard Drive to launch the Migration Wizard.4. Click Next on the Migration Wizard screen.5. Enter a RAID volume name or accept the default.6. For RAID 0, select RAID 0 as the RAID level from the drop-down box.For RAID 1, select RAID 1 as the RAID level from the drop-down box.7. For RAID 0, select the appropriate strip size from the drop-down box, and then click Next.For RAID 1, skip to step 8.8. On the Select Source Hard Drive screen, double-click the hard drive from which you want to migrate, and click Next.9. On the Select Member Hard Drive screen, double-click the hard drive to select the member drive to span the array and click Next.10. For RAID 0, on the Specify Volume Size screen, select the Volume Size you want, and click Next.For RAID 1, skip to step 11.11. Click Finish to start migrating, or click Back to make changes. You can use your computer normally during the migration process.NOTE: While this procedure deletes the RAID 1 volume, it also splits the RAID 1 volume into two non-RAID hard drives with a partition, and leaves anyexisting data files intact.NOTE: If you do not see an Actions menu option, you have not yet set your computer to RAID-enabled mode (see page 113).NOTE: Select the strip size closest to the size of the average file you want to store on the RAID volume. If you do not know the average file size, choose128 KB as your strip size.NOTE: Select the hard drive that you want to use as your source hard drive (it should be the hard drive containing the data or operating system filesthat you want to keep on the RAID volume).NOTE: In the following step, you will lose all data contained on the member drive.
