Dell precision m90 User Manual

Also see for Precision M90: Quick reference guide Quick reference guide Service manual User guide

Contents

6. Replace the Mini-Card/modem cover.Hinge Cover1. Follow the procedures in Before You Begin.2. Remove the hinge cover:a. Open the display all the way (180 degrees) so that it lies flat against your work surface.b. Insert a scribe into the indent to lift the hinge cover on the right side.c. Ease the hinge cover up, moving from right to left, and remove it.When replacing the hinge cover, first insert the left edge and then press from left to right until the cover snaps into place.Keyboard1. Follow the procedures in Before You Begin.NOTE: If your computer has a gray cable, connect it to the connector with the gray triangle, if one is available on your card.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (suchas a connector on the back of the computer).NOTICE: To avoid damaging the system board, you must remove the battery before you begin working inside the computer.NOTICE: To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously. Do not use excessive force when removing the cover.1 hinge coverCAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (suchas a connector on the back of the computer).NOTICE: To avoid damaging the system board, you must remove the battery before you begin working inside the computer.Downloaded from LpManual.com Manuals