1. Mini Card slot 2. wireless card3. antenna cables 4. screwReplacing the Wireless CardWARNING: Before working inside your computer, read the safety information that shipped withyour computer and follow the steps in Before Working Inside Your Computer. After workinginside your computer, follow the instructions in After Working Inside Your Computer. For moresafety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.Procedure1. Align the notch on the wireless card with the tab on the Mini Card slot.2. Slide the wireless card at an angle into the Mini Card slot.3. Press the other end of the wireless card down and replace the screw that secures the wireless cardto the system board.4. Connect the antenna cables to the wireless card.The following table provides the antenna-cable color scheme for the wireless card supported byyour computer:Connectors on the wireless card Antenna-cable colorMain (white triangle) WhiteAuxilary (black triangle) BlackPost-requisites1. Replace the system-board shield.2. Replace the back cover.3. Replace the stand assembly.33