Option DescriptionNOTE: The default option might differ based on the operatingsystem of your computer.• Boot List Option - The list options are Legacy and UEFI. By default, theoption UEFI is selected.NOTE: The default option might differ based on the operatingsystem of your computer.• Add Boot Option - Enables you to add a boot option.• Delete Boot Option - Enables you to delete an existing boot option.• View - Enables you to view the current boot option in the computer.• Load Defaults - Restores the default settings of the computer.• Apply - Enables you to apply the settings.• Exit - Exits and starts the computer.Advanced Boot Options The Enable Legacy Option ROMs option will allow the legacy option ROMsto load, when in UEFI boot mode. Without this option, only UEFI optionROMs will load. This option is required for Legacy boot mode. This Legacyboot mode is not allowed when you enable the Secure Boot. By default,the Enable Legacy Option ROMs check-box is not selected. The otheroptions are:• Load Defaults - Restores the default settings of the computer.• Apply - Enables you to apply the settings.• Exit - Exits and starts the computer.Date/Time Allows you to set the date and time. The changes to the system date andtime takes effect immediately.Table 2. System ConfigurationOption DescriptionIntegrated NIC If you enable UEFI network stack, UEFI network protocols will be available.UEFI network allows pre-os and early os networking features to use NICsthat are enabled. This may be used without PXE turned on. When youenable Enabled w/PXE, the type of PXE boot (Legacy PXE or UEFI PXE)depends on the current boot mode and type of option ROMs in use. TheUEFI Network Stack is required in order to have UEFI PXE functionality fullyenabled.• Enabled UEFI Network Stack - This option is disabled by default.Allows you to enable or disable the integrated network card. You can setthe integrated NIC to:• Disabled• Enabled• Enabled w/PXE - This option is enabled by default.• Enabled w/Cloud DesktopNOTE: Depending on the computer and its installed devices, the itemslisted in this section may or may not appear.SATA Operation Allows you to configure the operating mode of the integrated SATA harddrive controller.• Disabled - The SATA controllers are hidden.71