Delphi 28315188 Amber Display Owner's Manual
                     | |
Contents
| 
11Using the Bluetooth® Hands FreeSetupThis section comprehends the setup options that initialize your Hands Free and Bluetooth® featuresavailable in your Radio.BLUETOOTH ONPress the /AUDIO knob and select BLUETOOTH ON to activate Bluetooth®. The BluetoothStatus icon is turned on. There are two Bluetooth icons: Connection Active icon and Statusicon.Then select one of the following options:ADD PHONEPress the OK button to select. The Radio will display ADDING PHONE for 3 seconds and theBluetooth® status icon will blink. In this discoverable mode, the Bluetooth® status icon will continueto blink up to 3 minutes. If no phone was added after the 3 minutes, the Radio will display NOPHONE FOUND. During this discoverable mode set your cell phone to add a Bluetooth device andlook for the name “Delphi Radio”. Follow the instructions on your phone to add a connection. UsePIN number 0000 to connect to the Radio. When the cell phone has successfully added, the Radiowill display PHONE CONNECTED on the first line and the Bluetooth ® cell phone name on thesecond line for 3 seconds.The Radio can save up to 8 cell phones. If the eight phones have been stored in the Radio, addinganother phone will eliminate the oldest cell phone used.CONNECTThis function is used when the user wants to connect a phone that has been previously paired withthe Radio. Press the /AUDIO button to confirm the action and the Radio will attempt theconnection starting with the last connected phone and trying each one of the previously storedphones.When the Radio connects, the Connection Active icon will blink. This is since the Radio isattempting to download the CONTACTS (for the DIAL CONTACS function). The Radio will cease toblink this icon if the contacts have been totally downloaded or if the Radio timed out from receivingcontacts from the cell phone device.DELETE ALLThis option will let the user delete all previously paired phones from the Radio memory.Available Hands Free/Bluetooth® featuresOnce your cell phone is properly paired (see ADD PHONE) and connected (See CONNECT), the followingare the features that the Radio may allow for your Hands Free experience, provided that your cell phonedevice supports any or all of themDIAL REDIALThe user can retrieve the last phone called and place the call. Press the /AUDIO button and thelast phone called will be dialed.DIAL CONTACTSThe Radio is able to read the cell phone contacts and display them. Press the /AUDIO knob toselect this feature. Rotate the /AUDIO knob to select between the different stored contacts (up to15 contacts are shown). Press the OK button if you want to dial to the listed contact. See Notes 1, 2and 5.Press or in order to fetch the next/previous group of 15 contacts while in the DIALCONTACTS submenu |
Related manuals for Delphi 28315188 Amber Display
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine