Delphi 28315188 Amber Display Owner's Manual
                     | |
Contents
| 
13Accepting a CallWhen an incoming call is received, the Radio will display the Name and Number of the cell phoneand “<<”. To accept the call, press the OK button.Rejecting a CallWhen an incoming call is received, the Radio will display the Name and Number of the cell phoneand “<<”. To reject the call, press the ESC button.Ending a CallWhile in Hands Free mode, when a call is in progress, the Radio will display the Number of the cellphone and the elapsed time. To end a call, simply press the ESC button.Microphone MuteWhile in Hands Free mode, when a call is in progress, pressing Preset 2/Pause/Play pushbuttonwill mute the Radio’s microphone. Press again to deactivate.Call TransferIf a call is in progress, press the /AUDIO button, select TRANSFER and press the /AUDIObutton again to allow the Radio to transfer the call to the cell phone for private conversations.Repeat this process, while in a call, if you want to return into Hands Free mode again.TWO WAY CALL operationWhenever the user is on a phone conversation and there is a second incoming call, the Radio canaccept the second incoming call by pressing the OK button. This will put ON HOLD the original call.To Switch Calls, simply press the /AUDIO button, rotate the knob and select SWITCH CALL togo back and forth between calls or select CONFERENCE if you wish to have the three parties onthe same conversation. See Note 3 and Note 4.Note 1: This function will only be shown if the cell phone supports this featureNote 2: The contacts shown on Radio display will depend on the information received by the Radio from thephone device used.Note 3: Function depends on cell phone device and/or network service provider.Note 4: Function might be different depending on the phone.Note 5: Some cell phones may require enabling this feature through their own applications. Please consultyour cell phone user guide regarding how to enable it.Note 6: The interpretation of the voice commands rely on the cell phone and not in the Radio.Note 7: Some phones will make the Radio display ‘BT AUDIO PAUSE” and have audio available. This isnormal as those phones do not have full compatibility with the Radio for BT remote control commands.Using the Compact Disc Player/USBThe integrated CD player plays full size CDs, MP3 and WMA discs.Playing a Compact Disc1. Turn the receiver on.2. Insert a disc partway into the slot, label-side up. The player will automatically pull the disc in once it hasbeen partially inserted. CD READING and the CD icon will appear on the display followed by the tracknumber and elapsed time. Then, the disc will begin to play.3. If you are listening to FM/AM/WX Radio, press the SRC button to play a CD that has been loaded into theplayer. If no CD has been loaded, the option will not be available and the Radio will access the nextavailable source. If no sources are available, the Radio will remain on REAR AUX. If a CD has been loaded,the CD icon remains on until the CD has been ejected. CD READING will appear followed by the tracknumber and the elapsed time.If a CD is ejected and not removed within 15 seconds, the CD will reload but will not start playing until theSRC button is pressed. |
Related manuals for Delphi 28315188 Amber Display
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine