Delphi DEA5XX Owner's Manual

Contents

Delphi DEA5XX Owner's Manual Manual pdf 15 page image

Owner´s Manual DEA5XX Radios15 | P a g eselection (12- or 24-hour mode). Change thehour by rotating the knob and confirm the hourby pressing the knob. After that the alarmminute digits will begin to blink, change andconfirm the selection.SET TONE or SET MUSIC: Changebetween SET TONE or SET MUSIC by rotatingthe knob and pressing the knob.VOLUME: When Tone is selected, thevolume can be changed between Low, Mid andHigh (no sound will be heard while setting upthe Tone volume). When Music is selected,adjust the volume from 0 to 30.Turning the Alarm OffWhen the alarm is triggered, to cancel thealarm, short press the preset 3 button. If you donot turn the alarm off, it will automatically shutoff after 63 minutes.Activating SnoozeTo SNOOZE the alarm, press any button forless than 2 seconds when the alarm sounds,except Preset 3 button. SNOOZE will appear for3 seconds and the alarm will be postponed for 9minutes.User MenuThe User Menu is shown when the Volumeknob is pressed for more than 2 seconds.In this menu the user can configured thefollowing options: Speakers Seek Sensitivity Playback configuration Dimming Category Enable/Disable Hue Adjustment.Not all the options are available in all themodes. See restrictions in the followingsections.Once in the user menu, rotate the knob until thedesired option is displayed, press the volumeknob to select.Speakers (SPEAKERS)The display will show SPEAKERS and thecurrent selected option. This submenu allowsyou to change the speakers between 2 and 4Channels. Rotate the knob to change between2CH or 4CH and press the Knob to select thedesired option.Seek Sensitivity (SEEK SEN)The display will show SEEK SENS and thecurrent level from -2 to +2. Rotate the knobclockwise to increase the Sensitivity value andcounterclockwise to decrease it. Press the Knobto select the desired option. This option is onlyavailable when radio is playing Tuner Mode.Tune Configuration (TUNE CFG)The display will show TUNE and the currentselected option Auto or Manual. Rotate theknob to change between AUTO and MANUAL,press the Knob to select the desired option.Playback Configuration (PLBKCFG)This menu allows the user to select the NEXTand PREV buttons configuration. The displaywill show the current selected option SEEK orFAST F/F. Rotate the knob to change betweenSEEK or FAST F/F, press the Knob to selectthe desired option. This option is only availablewhen the radio is playing CD, USB or iPodMode.Dimming (DIMMING)When the vehicle uses dimming by CAN orAnalog configuration, the display will showDIMMING 0. This value can be adjusted from -10 to +10. Otherwise the display will showDIMMING and the current selected level from 0to 30. Rotate the knob clockwise to increase theDimming and counterclockwise to decrease itCategory Enable/Disable (CATE/D)The display will show CAT ENABLE or CATDISABLE depending on the current selection.Rotate the knob to change between the twooptions and press the Knob to confirm theselection. This option is only available in SXMMode.HUE Adjustment (HUE ADJ)Depending on the Radio colors available thedisplay will show any of the following options:AMBER or GREENRED or BLUERotate the knob to change between the twooptions and press the knob to confirm selection.This option is only available in models equippedwith Dual Color.