8EXTENSION CORDSUSE PROPER EXTENSION CORDS.MAKE SURE YOUR EXTENSION CORD IS IN GOODCONDITION AND IS A 3-WIRE EXTENSION CORDWHICH HAS A 3-PRONG GROUNDING TYPE PLUGAND MATCHING RECEPTACLE WHICH WILLACCEPT THE MACHINE’S PLUG. WHEN USING ANEXTENSION CORD, BE SURE TO USE ONE HEAVYENOUGH TO CARRY THE CURRENT OF THEMACHINE. AN UNDERSIZED CORD WILL CAUSEA DROP IN LINE VOLTAGE, RESULTING IN LOSSOF POWER AND OVERHEATING. FIG. D-1 SHOWSTHE CORRECT GAUGE TO USE DEPENDING ONTHE CORD LENGTH. IF IN DOUBT, USE THE NEXTHEAVIER GAUGE. THE SMALLER THE GAUGENUMBER, THE HEAVIER THE CORD.Fig. D-1MINIMUM GAUGE EXTENSION CORDRECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINESAmpereRating VoltsTotalLength ofCord inFeetGauge of ExtensionCord0-6 120 up to 25 18 AWG0-6 120 25-50 16 AWG0-6 120 50-100 16 AWG0-6 120 100-150 14 AWG6-10 120 up to 25 18 AWG6-10 120 25-50 16 AWG6-10 120 50-100 14 AWG6-10 120 100-150 12 AWG10-12 120 up to 25 16 AWG10-12 120 25-50 16 AWG10-12 120 50-100 14 AWG10-12 120 100-150 12 AWG12-16 120 up to 25 14 AWG12-16 120 25-50 12 AWG12-16 120 GREATER THAN 50 FEET NOT RECOMMENDEDFOREWORDFUNCTIONAL DESCRIPTIONThe Delta DP300L 12" Drill Press comes with a flexible work lamp, a laser guide for precise drilling and a utility tray forkeeping tools within easy reach. This machine has a tilting table for angle drilling and side edges and parallel slots forfast workpiece clamping.NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in themanual are representative only and may not depict the actual labeling or accessories included. These are are intendedto illustrate technique only.