Delta DP300L Instruction Manual

Contents

Delta DP300L Instruction Manual Manual pdf 9 page image

1. Drill Press Head and Motor2. Table3. Column, Base Flange and Rack4. Base5. M8x1.25x25mm Hex Head Cap Screws (4)6. Worm Gear for Table Raising and Lowering7. Hex Wrenches (2)8. Pinion Shaft Handles (3)9. M8x1.25x125mm Carriage Head Screws (2), M8Flat Washers (2), M8.1 Lock Washers (2), M8x1.25Hex Nuts (2) (for fastening the base to a supportingsurface)10. Chuck Key11. Table Raising and Lowering Handle12. Table Clamp13. Chuck14. Clamp15. Mounting bracket16. Tray17. Mounting arm18. Laser19. Laser Alignment Rod20. Hex Head Cap Screws (2)1 2 34567891011121314 15 1617CARTON CONTENTS1819UNPACKING AND CLEANINGCarefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil fromunpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.DO NOT USE HIGHLY VOLATILE SOLVENTS SUCH AS GASOLINE, NAPHTHA, ACETONE OR LACQUERTHINNER FOR CLEANING YOUR MACHINE.After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.209