Delta PD-01 User Manual

Delta PD-01 User Manual Manual pdf 28 page image

PD-01 PROFIBUS-DP ModuleDELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 25ExtUserPrmData = 13 "LossSPComTreat"Unsigned16 0 0-2Prm_Text_Ref = 3EndExtUserPrmDataExt_User_Prm_Data_Ref(0) = 1Ext_User_Prm_Data_Ref(2) = 2Ext_User_Prm_Data_Ref(4) = 3Ext_User_Prm_Data_Ref(6) = 4Ext_User_Prm_Data_Ref(8) = 5Ext_User_Prm_Data_Ref(10) = 6Ext_User_Prm_Data_Ref(12) = 7Ext_User_Prm_Data_Ref(14) = 8Ext_User_Prm_Data_Ref(16) = 9Ext_User_Prm_Data_Ref(18) = 10Ext_User_Prm_Data_Ref(20) = 11Ext_User_Prm_Data_Ref(22) = 12Ext_User_Prm_Data_Ref(24) = 13File END: ==========================================================NOTE:The required GSD file is available and can be downloaded from the DELTA web sitehttp://www.delta.com.tw, or you can copy this text to a text editor such as NOTEPAD, andsave it as a GSD file named “DELT08DB.GSD”. Please make sure to specify the file nameextension as “.GSD”, PLEASE DO NOT SAVE IT extension “.GSD.TXT”.User parameters in GSD fileThe user parameters in GSD file are used for the configuration of the PROFIBUS network.The description of the user parameters are shown in the following table:Item Name Type Description Default1 Data Input 1 UINT This is a MODBUS address. The 1st word inPZD of cyclic output data will be sent to thisaddress.0x20002 Data Input 2 UINT This is a MODBUS address. The 2nd word inPZD of cyclic output data will be sent to thisaddress.0x2001