Deltronic Security TT-2000 Ticket Eater User Manual
                                         | |
Contents
| 
TT-2000 Ticket Eater™ by Deltronic Labs February 2013 12Maintenance Checklist1. To avoid damaging the sensor board, remove it before releasing or removing theGuide Assembly.2. When the Guide Assembly is released or the entire assembly is removed forservicing or cleaning, follow this procedure to replace it:a. The motor assembly has extraO rings installed on both theLower Drive Roller Shaftand the Motor Shaft. Beforereplacing the guide assembly,make sure the O rings are notriding on the sides of therollers. They should be nextto the Side Plates and awayfrom the rollers.b. Place the Rear Idler Roller(the one closest to the cutter)into its slots in the side plates.c. Let the Front Idler RollerShaft drop into its slots in theside plates. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine