Deltronic Security TT-2000 Ticket Eater User Manual
                                         | |
Contents
| 
TT-2000 Ticket Eater™ by Deltronic Labs February 2013 7Changing Options Without SoftwareDL Ticket Eater Manager software is thepreferred way to manage your TT-2000Ticket Eater with AP-100 main logic board.The previous section of this manual coversthat. Some options can also be changedwithout the software by using buttons insidethe TT-2000. This section covers thoseprocedures. Changing any of the wordsprinted on the receipt can only be done withthe software.These procedures use the two buttons mounted in front of the logic board, the SW1button on the logic board, and the 7 segment display on the door. The RUN/PRG jumperis not used. It must stay in the RUN position. Leaving the jumper in the PRG positionwill drain battery. To enter the options mode:1. Open the top door of the Ticket Eater.2. Pull out the safety switch. This turns the Ticket Eater on with the door open. Thered and green LED’s on the main logic board should be on.3. Wait for the display to finish the power-up test and enter the “Snake” mode.4. Push the SW1 button.5. The display will show 99 0. You are now in Options Mode.In Options Mode the first number (99 in this case) shows the number of the option thatyou are working with. The second number (0 in this case) shows the option’s value.Pressing the red or black button in front of the logic board changes the option’s value.Pressing both buttons at the same time accepts the currently displayed value.Button FunctionBlack Increase the ValueRed Decrease the ValueBoth Accept the ValueThe options are organized into groups. 99 is a special number which indicates that youare selecting a group of options to work with. When you select a group, the first optionin that group is displayed. As you accept each option by pressing both buttons together,the next option is displayed. After the last option is accepted you are returned to 99 sothat you can select another group. If you turn off the machine before you finish viewinga group, your changes to that group will be lost.Group 99 0Option Number Function Values1 Year 0 to 992 Month 1 to 123 Date 1 to 314 Day 1 to 7(Sunday to Saturday)5 Hour 0 to 236 Minute 0 to 59 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine