Denon 1083 Operating Instructions Manual

Also see for AVR-1083: Specifications Operating instructions Service manual Operating instructions Operating instructions

Denon 1083 Operating Instructions Manual Manual pdf 68 page image

6812 LISTENING TO THE RADIOIf tuning does not stop at the desired station, use to the “Manualtuning” operation.1 Set the input function to “TUNER”.FUNCTION2 Watching the display, press theBAND button to select the desiredband (AM or FM).3 Press the MODE button to set theauto tuning mode.4 Press the TUNING UP or DOWNbutton.Auto tuning“Auto” appears on the display.Automatic searching begins, thenstops when a station is tuned in.(Main unit) (Remote control unit)Manual tuning1 Set the input function to “TUNER”.1AMP3124(Remote control unit)(Remote control unit)(Remote control unit)• Check that the remote control unit is set to AMP.FUNCTION2 Watching the display, press theBAND button to select the desiredband (AM or FM).3 Press the MODE button to set themanual tuning mode.Check that the display’s “AUTO”indicator turns off.(Main unit) (Remote control unit)(Remote control unit)(Remote control unit)4 Press the TUNING UP or DOWN buttonto tune in the desired station.The frequency changes continuouslywhen the button is held in.(Remote control unit)NOTES:• When in the auto tuning mode on the FM band, the “STEREO”indicator lights on the display when a stereo broadcast is tuned in.At open frequencies, the noise is muted and the “TUNED” and“STEREO” indicators turn off.• When the manual tuning mode is set, FM stereo broadcasts arereceived in monaural and the “STEREO” indicator turns off.