Denon ADV-1000 Operating Instructions Manual

Also see for ADV-1000: Specifications Operating instructions Operating instructions Service manual

Contents

[] OPERATION1,3 50 0 0 _ _ 0 OOO00 o32 m 3mlm5Either turn the FUNCTiON/SELECT knob on the main unit orpress the FUNCTION button on the remote control unit toselect the input function to be played.FUNCTION/ SELECT0 FUNOTEONMain unit Remote control unit• The function switches as shown below.• The function only changes in the "-e" direction whenoperated from the remote control unit_ TUNER _ DVD _ TV/DBSCDR/TAPE _ VCR _ V.AUX -_When DVD, TV/DBS or V.AUX was selected as the inputfunction, press the remote control unit's iNPUT MODEbutton to select the input mode.INPUT_OOERemote control unit_AUTO _ PCM _ DTS _ ANALOG •• "ANALOG" cannot be selected when DVD was selected asthe input function.Input mode selection function• The input mode can be selected when the input function isset to DVD, TV/DBS or V.AUX.• Different input modes can be selected for each inputfunction. The selected input mode is stored in the memoryfor the individual input functions.• When the input function is set to something other than theabove, "ANALOG ONLY" is displayed and the input modecannot be selected_) AUTO (auto mode)In this mode, the type of signal being input to the digitaland analog input terminals is detected and the program inthe set's surround decoder is switched automatically toplay the signals for the selected input function.The presence or absence of digital signals is detected, thesignals input to the digital input are identified and decodingand playback are performed automaticafly in DTS, DolbyDigital or PCM (2 channel stereo) formatIf no digital signal (TV DBS and V.AUX) is being input, theanalog input jacks are selected.Use this mode to play Dolby Digital signals(-2) PCM (exclusive PCM signal playback mode)Decoding and playback are only performed when PCMsignals are being input.@ DTS {exclusive DTS signal playback mode)Decoding and playback are only performed when DTSsignals are being input._ ANALOG {exclusive analog audio signal playback mode)The signals input to the analog input jacks are played(This cannot be selected in the DVD mode.)-_ The input mode automatically switches to "AUTO" if youswitch the input function to DVD from anything other thanDVD.Either press the SURROUND MODE button on the main unitthen turn the FUNCTION/SELECT dial or press theSURROUND button on the remote control unit to select thesurround mode.SURROUND FUNCTIONMODE / SELECT SURROUNDMain unit Main unit Remote control unit• The function switches as shown below.• The function only changes in the "-e" direction whenoperated from the remote control unit.STEREO<_- AUTO DECODE_ 5CHSTEREO<_- MONO MOVIE<_- ROCKARENA _ JAZZ CLUB <_- VIDEO GAMEMATRIX _ VIRTUAL _ DIRECT _ STEREO-,• The "AUTO DECODE" mode can be selected with theAUTO DECODE button on the main unit, the "SCHSTEREO" mode with the 5CH STEREO button on the mainunit35