Denon ADV-1000 Operating Instructions Manual

Also see for ADV-1000: Specifications Operating instructions Operating instructions Service manual

Contents

Example: Presetting FM station (currently tuned in) at preset number P03, gggl2oo£1©O0OlBefore operating the remote control unit! TjNE[T,N_Be sureto pressthe properremote controlmode selector _'_buttonto setthe remote controlunitto the AV mode.While the "PO -" ("PI-", "P2-" or "P3-") indication is flashing,use the shift button and the channel (CH) buttons (-, +) todsplay the preset number "P03",_ Each press of the shift button adds 10 to the current presetnumber in the range of P01 to P40.Example:Starting with a Pt3setting, each press ofthe shift button resultsin the changes P13 ..... "-_P23 P33 _ P03 Remote control unitP13Example:Starting with a PO0 setting, each press of the shift button results inthe changes P0-P1O P20 P30 P40 P10 ..1 Tune in the broadcast station that is to be preset and pressthe Memory button.• A "PO -" ("Ply', "P2-" or "P3-") indication flashes for 10seconds.Press the MEMORY button while the "P03" display _sflashing• The "P03" display will light and presetting will becompletedNTSC/PAL NTSCJPALRemote control unit Remote control unitPresetting• Up to 40 AM or FM stations can be preset using this procedure.• In addition to the reception frequency, the reception mode {monaural or auto) is also preset, so check the display when presetting stations.• If a station is preset at a number where a station is already preset, the previous station is replaced with the new station.• The preset memory is not cleared when the power cord is unplugged.Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)_m®®,.@,o00000000©oo©Before operating the remote control unit! TJNE_T£4_Be sure to press the proper remote control mode selector (_button to set the remote control unit to the AV mode.1 Press the remote control shift button and the channel (CH)button (-, +) and select preset number "P03"Remote control unit53