Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

Also see for AV SURROUND RECEIVER AVR-5308CI: User manual Brochure & specs Product Compatibility Chart Owner's manual Capabilites and Compatibilities

Contents

Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual Manual pdf 48 page image

Getting Started Connections Playback Remote Control Multi-Zone Information TroubleshootingSetupg VideoSetting the video source.Video SelectSwitch video input source while listening to audio signal.[Selectable items]DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUXSOURCEVideo ConvertAutomatically convert video input signal to monitor output format.[Input source]DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX[Selectable items] ON OFFNOTE• For optimum video performance, THX recommends that you set theconversion mode to “OFF” to use video signals pass through systemwithout up conversion.Example: The video input signals from the component video canbe enjoyed through the video output signals from thecomponent video.• When a non-standard video signal from a game machine or someother source is input, the video conversion function might notoperate. If this happens, please set the conversion mode to “OFF”.Operating from the main unitPress the VIDEO SELECT button, then turn the SOURCE SELECT knobuntil the desired picture appears.b To cancel, press the main unit’s VIDEO SELECT button, then turn themain unit’s SOURCE SELECT knob and select “SOURCE”.NOTE• It is not possible to select HDMI input signals.• When playing HDMI video input signals, the analog video signal ofanother input source cannot be selected for the HDMI video output.• Input sources for which “Delete” is selected at “Source Delete”cannot be selected.i/p ScalerMake settings for i/p scaler function.[Selectable items] A to H A to H & H to H OFF• This can not be set when “Video Convert“ is set to “OFF”.• The “A to H & H to H” can be set to the input source assigned to theHDMI input connector.• “A to H & H to H” setting:• Deep color (10 bit/12 bit) signals are converted into 8-bit signals.• The i/p scaler function does not work if xvYCC or computer’sresolution signals are input.ResolutionMake settings for resolution of HDMI video output signal.[Selectable items] Auto 480p/576p 1080i 720p 1080p• This can be set when “i/p Scaler” is set to anything other than“OFF”.• When the “i/p Scaler” is set to “A to H & H to H”, the resolutions canbe setup to the analog video input signal and HDMI input signal.This can be set when “i/p Scaler” is set to anything other than “OFF”.AspectThis sets the aspect ratio when outputting 480i/576i or 480p/576pinput signals from the HDMI output connector.[Selectable items] Full NormalThis can be set when “i/p Scaler” is set to anything other than “OFF”.Progressive ModeSelect optimum progressive mode for video material.[Selectable items] Auto Video1 Video2Operating from the main unitPress the SCALE button.Auto 480p / 576p 1080i1080p 720ph Input ModeMake input mode and decode mode settings for this source.The selectable input modes depend on the input source and“Assign” setting (vpage 46, 47).Input ModeSet the input mode for this source.[Input source] TUNER PHONO ( iPod )[Selectable items] Analog EXT. IN[Input source] NET/USB XM HD Radio[Selectable items] Auto EXT. IN[Input source]CD DVD HDP TV/CBL SAT VCR DVR-1 DVR-2V.AUX[Selectable items]Auto HDMI Digital Analog EXT. IN• When a digital signal is properly input, the “ ” indicator lights onthe display. If the “ ” indicator does not light, check the digitalinput connector assignment and the connections.• The surround mode cannot be set if the input mode is set to “EXT.IN”.Operating from the main unit or main remotecontrol unitPress the INPUT MODE button on the main unit or the INPUT buttonon the main remote control unit.Auto HDMI DigitalAnalogEXT. INz1: This can be selected for input sources for which the GUI menu“Assign” setting is set to “HDMI” (vpage 46). Excluding CD.z2: This can be selected for input sources for which the GUI menu“Assign” setting is set to “Digital” (vpage 46).