Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

Also see for AV SURROUND RECEIVER AVR-5308CI: User manual Brochure & specs Product Compatibility Chart Owner's manual Capabilites and Compatibilities

Contents

Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual Manual pdf 78 page image

Resetting the MicroprocessorPerform this procedure if the display is abnormal or if operationscannot be performed.All settings are reset when the microcomputer is reset. However,the information in the Rhapsody account is not reset.1 Turn off the power using .2 Press while simultaneously pressing and .3 Once the display starts flashing at intervals of about 1second, release the two buttons.If in step 3 the display does not flash at intervals of about 1 second,start over from step 1.Personal Memory Plus FunctionThis function sets the settings (input mode, surround mode,HDMI output mode, Picture Adjust, Audio Delay etc.) last selectedfor the individual input sources.When you switch to an input source, the settings are automaticallyset to the ones that were set the last time that input source wasused.The surround parameters, tone control, room EQ settings and thevolumes of the different speakers are stored for the individual surroundmodes.Last Function MemoryThis stores the settings as they were directly before the standbymode was set.When the power is turned back on, the settings are restored to asthey were directly before the standby mode was set.Backup MemoryThe various settings are backed up for about 1 week, even if thepower is turned off or the power cord is disconnected. About the button names in these explanations< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unitGetting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting