Denon AVR-1507 Operating Instructions Manual

Also see for AVR-1507: Operating instructions Brochure & specs Dimensions Service manual Service manual

Contents

Basic Operation Basic OperationENGLISH28ENGLISHSelecting the Dolby Digital and DTS Surroundmode (only with digital input)Play a program source with the , mark.• “ ” or “ ” lights, depending on the source.Press SURROUND PARAMETER.Press DD HH to select the item, then press FF GG to set.The parameter switches as shown below each time the button ispressed.Press [STANDARD] to select “STANDARD (Dolby/DTSSurround)”.3654Select an input source for which digital (COAXIAL orOPTICAL) is set ( page 21).1Press INPUT MODE to select “AUTO”.2D.COMP.:The dynamic range is compressed. Select one of 4 modes: “OFF”,“LOW”, “MID” (middle) or “HIGH”.Effective source / modeDolby Digital /DTS (For DTS sources, only displayed for compatible software.)LFE:To play the various types of software properly, we recommendsetting to the values shown below.• To play Dolby Digital software: “0 dB”• To play DTS movie software: “0 dB”• To play DTS music software: “–10 dB”TONE:Adjust the tone control.Can be set in surround modes other than direct mode.Can be set separately for the different surround modes.(Adjusted together for the Dolby/DTS SURROUND modes.)SB CH OUT:Select the play mode or surround back channel playback method.• The surround back indicator lights.(1) For multi-channel sources• SB OFF (OFF):Not played.• NON MTRX:Surround channel signal played.• MTRX ON:Surround channel signal played with digital matrix processing.• ES MTRX:DTS signal played with digital matrix processing.• ES DSCRT:Signal included in DTS-ES discrete 6.1-channel sources played.• PLIIx CINEMA:Decoded in Dolby Pro Logic IIx Cinema mode, surround backsignal played.Set the surround back speaker to “2sp” at SpeakerConfiguration mode ( page 19).• PLIIx MUSIC:Decoded in Dolby Pro Logic IIx Music mode, surround backsignal played.Set the surround back speaker to “1sp” or “2sp” at SpeakerConfiguration mode ( page 19).CINEMA EQ.:Use this if movie dialogues sound harsh to lower the treble sound.Effective source / modeDolby Pro Logic IIx / Dolby Pro Logic / Dolby Digital /DTS Surround / DTS NEO:6 / NEURAL SURROUND• Select “DEFAULT Y/N” and press FF to reset all the settings.¢ Dialog normalization functionThis operates automatically when playing Dolby Digital sources.This is a function for automatically correcting the standard signal levelfor different program sources. The correction value can be checked bypressing STATUS.O f f s e t - 4 d BThe numbers are the correction value when corrected to the standard level.(2) For 2-channel sources• OFF: Not played.• ON: Surround channel signal played.Press ENTER or SURROUND PARAMETER.7CINEMA EQ D.COMP.SURROUND BACKLFE TONE DEFEATDEFAULTIf you do want the bass and treble to be adjusted, turn off the tonedefeat mode.