Denon AVR-1507 Operating Instructions Manual

Also see for AVR-1507: Operating instructions Brochure & specs Dimensions Service manual Service manual

Contents

Basic Operation Basic OperationENGLISH37ENGLISHAbout the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitUse to select “TUNER” or press[TUNER].Auto tuningManual tuningPress [MODE] to set the auto tuning mode.• The “AUTO” indicator lights.Press TUNING.• Automatic searching begins.• If tuning does not stop at the desired station, use to the “Manualtuning” operation.• “AM” or “FM” can be selected directly by pressing [FM/AM].Use to select “TUNER” or press[TUNER].Press [MODE] to set the manual tuning mode.Check that the display’s “AUTO” indicator turns off.Press BAND to select “AM”, “FM” or “XM”.When listening to the XM Satellite Radio ( page 38).Press BAND to select “AM”, “FM” or “XM”.When listening to the XM Satellite Radio ( page 38).Press TUNING.The frequency changes continuously when the button is held in.12341234• When the manual tuning mode is set, FM stereo broadcasts arereceived in monaural and the “STEREO” indicator turns off.• “AM” or “FM” can be selected directly by pressing [FM/AM].Use the “Auto tuning” or “Manual tuning” operationto tune in the station to be preset in the memory.Press [MEMORY].Press CHANNEL to select the desired preset channel(1 to 8).Preset memoryPress SHIFT to select the desired memory block (A toG).Press [MEMORY] again.• Store the station in the preset memory.12345• To preset other channels, repeat steps 2 to 5.A total of 56 broadcast stations can be preset — 8 stations (channels1 to 8) in each of blocks A to G.• The memory block can also be selected by pressing SHIFT.Recalling preset stationsPress SHIFT to select the memory block.Press CHANNEL to select the desired preset channel.12SHIFT[FM/AM]CHANNEL[XM RADIO]STATUSD H F GD H F G[TUNER][MODE]BANDTUNING[MEMORY]SHIFTSTATUSBANDTUNINGCHANNEL