Denon AVR-1508 Owner's Manual

Also see for AVR-1508: Comparison chart Code List Getting started guide Dimensions Manual Del Usuario

Denon AVR-1508 Owner's Manual Manual pdf 22 page image

Getting Started Connections Playback Remote Control Information TroubleshootingENGLISH• Audyssey MultEQ® automatically measures the acoustical problemsin the listening environment to create the best audio experience foryour home theater.• Audyssey MultEQ® optimizes a large listening area where one ormore listeners are seated.Measurements are performed by placing the calibrated microphone(DM-A405) successively at multiple positions throughout thelistening area as shown in Example q. For best results, it is stronglyrecommended to measure 6 positions so that the measurementshave the proper spatial weighting.Even if the listening environment is small as shown in Example w,measuring at multiple points throughout the listening environmentresults in more effective correction.PreparationsAuto SetupTo make manual adjustments to the settings, see pages 21 ~ 23.1 Press <SPEAKER> to select the front speakers FrontA, Front B or Front A+B.2 Connect the included calibrated setup microphone to<SETUP MIC>.“Auto Set Start” is displayed.3 Place the microphone at ear height on a tripod or standwith the microphone pointing directly up towards theceiling.b It is not recommended to hold it in your hand. Be sure that thepath from microphone to the speakers is not blocked by objects.Avoid placing the microphone close to a seat back or wall as soundreflections may give inaccurate results.SoundreceptorSetupmicrophoneAbout the main listening position (*M)The main listening position refers to the most central position whereone would normally sit within the listening environment.MultEQ uses the measurements from this position to calculatespeaker distance, level, polarity, and the optimum crossover valuefor the subwoofer.*M *MExample q Example w( :Measuring positions)uio ENTERMASTER VOLUMEENTER, oMASTER VOLUME uiuio ENTER[Front][Rear]About the button names in these explanations< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unitSetup