Denon AVR-1513 Owner's Manual

Also see for AVR-1513: Quick start guide Getting started Service manual Quick start guide Owner's manual

Denon AVR-1513 Owner's Manual Manual pdf 13 page image

10a a aVIDEOAUDIOINVIDEOOUTCOAXIAL OPTICALOUTTVorNOTE• The menu screen is only displayed on TV connected to this unit via HDMI. If your TV is connectedto this unit via other video output connectors, perform menu operations while seeing the displayon this unit.• If the VIDEO input connector is to be used, be sure to connect the MONITOR output connector of theunit and the VIDEO input connector of the TV, using a video cable.Connecting a TV• This section describes how to connect when your TV does not support HDMI connections.For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 5).• To listen to TV audio through this device, use the optical digital connection.n Audio connectionThe following methods are available for connecting to this unit. Use either of the methods to makea connection.The numbers prefixed with connectors indicate the recommendation order. The smaller the number is,the higher playback quality is achieved.a DIGITAL AUDIO COAXIAL connector zDIGITAL AUDIO OPTICAL connectorWhen a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play backsurround sound.z: When making this type of connection, you must change the settings on this unit.(v Input connector setting )n Video connectionThe following methods are available for connecting to this unit.a VIDEO OUT (MONITOR) connectorThis makes an analog video connection.When making the following connection, you must change the input connector settings.a DIGITAL AUDIO COAXIAL connectorChange the default “CBL/SAT” to “TV AUDIO”.For how to change, see “Input Assign” (vpage 30).Input connector settingConnecting an HDMI-incompatible device