Denon AVR-1513 Owner's Manual

Also see for AVR-1513: Quick start guide Getting started Service manual Quick start guide Owner's manual

Denon AVR-1513 Owner's Manual Manual pdf 29 page image

26Convenient functionsSleep timer functionThe power automatically goes into standby once the set time haselapsed.This is convenient for playing sources while going to sleep.Press SLEEP and display the time youwant to set.The “SLEEP” indicator on the display lights.• The time switches as shown below eachtime SLEEP is pressed.CH LEVEL SLEEP DIMMER SEARCHMODESHIFTBANDMEMORYCBL /SATBlu-rayDVDGAMEAUXVOLUMEINFO AUDIOBACK SETUPMUTETONERESTORERNIGHTRC-1170SURROUND AUDIO DELAYTV AUDIO CHANNEL TUNETUNERPOWERQUICK SELECTENTER21 3 4OFF 10 min 20 30 40 506080 7090100110120To cancel the sleep timerPress SLEEP to set “OFF”.The “SLEEP” indicator on the display turns off.• If you do not press any button for approximately 5 seconds, themenu screen light turns off.• The sleep timer setting is canceled if this unit’s power is set tostandby or turned off.Quick select functionYou can save settings such as the input source selection, volumelevel, and sound mode at the QUICK SELECT 1 – 4 buttons.You can simply press one of the set QUICK SELECT buttons forsubsequent playback to switch to various saved settings all at once.n Saving the settings1 Set the items below to the settingsyou want to save.CH LEVEL SLEEP DIMMER SEARCHMODESHIFTBANDMEMORYCBL /SATBlu-rayDVDGAMEAUXVOLUMEINFO AUDIOBACK SETUPMUTETONERESTORERNIGHTRC-1170SURROUND AUDIO DELAYTV AUDIO CHANNEL TUNETUNERPOWERQUICK SELECTENTER21 3 4q Input source (vpage 14)w Volume (vpage 14)e Surround mode (vpage 18)r Video Source (vpage 31)2 Press and hold the desired QUICK SELECT until“Memory” appears on the display.The current settings will be memorized.GQuick select defaultsHInputsource Volume SurroundmodeVideoSourceQUICKSELECT 1 CBL/SAT40 MULTI CHSTEREO SOURCEQUICKSELECT 2 Blu-rayQUICKSELECT 3 GAMEQUICKSELECT 4 AUXn Recalling the settingsPress QUICK SELECT at which thesettings you want to call out are saved.CH LEVEL SLEEP DIMMER SEARCHMODESHIFTBANDMEMORYCBL /SATBlu-rayDVDGAMEAUXVOLUMEINFO AUDIOBACK SETUPTV AUDIO CHANNEL TUNETUNERPOWERQUICK SELECTENTER21 3 4If QUICK SELECT on the main unit is pressed, the same function aswith the remote control unit can be obtained.Various memory functionsn Personal memory plus functionThis function sets the settings (input mode, surround mode, HDMIoutput mode, audio delay etc.) last selected for the individual inputsources.The surround parameters, tone settings and the volumes of thedifferent speakers are stored for the individual surround modes.n Last function memoryThis function stores the settings which were made before goinginto the standby mode.When the power is turned back on, the settings are restored.