Getting Started Setup Playback Remote Control Multi-Zone Information TroubleshootingENGLISH Specificationsn AM loop antenna assemblyRemove the vinyl tie and takeout the connection line.Connect to the AMantenna terminals.Bend in the reverse direction.a. With the antenna on top ofany stable surface.Mountb. With the antenna attachedto a wall.Installation hole Mount on wall, etc.NOTE• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnect the AM loop antenna.• Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.External Controller"69065 Input OutputInfraredretransmitterInfraredsensorExtension jack for future use.(Connect devices correspondingwith room to room function tothis jack.)Connecting a Room-to-Room Remote Control UnitNOTE• Insert the AC plugs securely. Incomplete connections could cause noise.• Only use the AC outlets to plug in audio equipment. Do not use them as power supplies for hairdryers oranything other than audio equipment.Wait until all connections have been completed before connecting the power cord.To householdpower outlet(AC 120 V, 60 Hz)Power cordConnection to the AC outlets• These outlets supply power to external audioequipment.• The power supplied from these outlets turns on andoff together with the set’s power switch.• Audio equipment with a total power consumptionof 120 W (1 A) can be connected.Turning the Power On (vpage 37)Connecting the Power CordOnce Connections are CompletedConnections