Denon AVR-1612 Owner's Manual

Also see for AVR-1612: Specifications Getting started Manual Getting started Service manual

69Input SetupInput Mode (Audio) Default settings are underlined.The input modes available for selection may vary depending on the input source.Setting items Setting detailsInput ModeSet the audio input modesfor the different inputsources.It is normally recommendedto set the audio input modeto “Auto”.Auto : Automatically detect input signal and perform playback.HDMI : Play only signals from HDMI input.Digital : Play only signals from digital input.Analog : Play only signals from analog input.• “HDMI” can be set for input sources for which “HDMI” is assigned at“Input Assign” (vpage 68).• “Digital” can be set for input sources for which “Digital” is assigned at“Input Assign” (vpage 68).• If the input source is set to “TV” or “GAME”, it cannot be set to“Analog”.• When digital signals are properly input, the indicator lights onthe display. If the indicator does not light, check the digital inputconnector assignment and the connections.• If “HDMI Control” is set to “ON” and a TV compatible with the ARC isconnected via the HDMI MONITOR connectors, the input mode whoseinput source is “TV” is fixed to ARC.Decode ModeSet the audio decode modefor input source.BD DVD TVSAT/CBL GAMEV.AUX DOCKAuto : Detect type of digital input signal and decode and play automatically.PCM : Decode and play only PCM input signals.DTS : Decode and play only DTS input signals.• This item can be set for input sources for which “HDMI” or “Digital” isassigned at “Input Assign” (vpage 68).• Normally set this mode to “Auto”. Set “PCM” and “DTS” wheninputting the corresponding input signal.Setting items Setting detailsDefaultThe “Input Assign” settingsare returned to the defaultsettings.Yes : Reset to the defaults.No : Do not reset to the defaults.If you select “Default” and press ENTER, themessage “Return settings to the default?”is displayed. Select “Yes” or “No”, and thenpress ENTER.Video Default settings are underlined.Set the source video.Setting items Setting detailsVideo SelectVideo of another inputsource is played backcombined with the playingaudio.SOURCE : Play the picture and sound of the input source.DVD / SAT/CBL / V.AUX / DOCK : Select video input source to view. Thiscan be set for individual input sources.NOTE• It is not possible to select HDMI input signals.• Input sources for which “Delete” is selected at “Source Delete”(vpage 63) cannot be selected.Video ModeMake settings for videoprocessing.DVD SAT/CBLV.AUX DOCKAuto : Process video automatically based on the HDMI contentinformation.Game : Always process video appropriate for game content.Movie : Process video normally.If “Video Mode” is set to “Auto”, the mode is switched according tothe input contents.