Getting StartedConnectionsSetupRemote ControlMulti-ZoneInformationTroubleshootingENGLISHRecording on an External Device(REC OUT mode)You can listen to one program source while recording a differentprogram source.1PressSELECT>until“RECOUT”appears on the display.ZONE2RECOUT2Turnto choose the input sourceto be recorded.The “REC” indicator and the indicator for the selected sourcelight.RECOUT SOURCERECOUT TUNERRECOUT XM····3Play the program source.For operating instructions, refer to the respective equipment’soperating instructions.To record FM or AM broadcasts, select the broadcast (vpage36).4Start recording.For operating instructions, refer to the respective equipment’soperating instructions.Other Operations andFunctionsOther Operations•To cancel, press, then turnuntil “ZONE2 SOURCE” is displayed.•Make a test recording before starting the actual recording.•Sources selected with the REC OUT mode are output from ZONE2as well.•In the REC OUT mode, the remote control unit’s ZONE2 modebuttons cannot be operated.NOTE•Recordings you make are for your personal enjoyment and shouldnot be used for other purposes without permission of the copyrightholder.•Digital signals are not output from the REC OUT (CDR/TAPE andVCR) connector.Convenient Functions1Pressor[CH SELECT].F LV o l . +1 . 5 d B2Useui,or[CH SELECT]to select thespeaker.The speaker that can be set switches each time one of thebuttons is pressed.3Useopto adjust the volume.b“OFF” can be set by pressingowhen the subwoofer’s volume isset to –12 dB.Channel LevelYou can adjust the channel level either according to the playbacksources or to suit your taste, as described below.,opuiuiop[CH SELECT]uiop[Front][Rear]About the button names in these explanations<>: Buttons on the main unit[]: Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unitPlayback
