Denon AVR-1802/882 Operating Instructions Manual

Also see for AVR-1802: Brochure & specs Operating instructions Service manual Operating instructions Operating instructions

17ENGLISH10 SETTING UP THE SYSTEM• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 9 to 15), make thevarious settings described below on the display.These settings are required to set up the listening room’s AV system centered around the this unit.STATUS MUTINGT.TONEMASTERVOLTITLEDISC SKIP+CD·MD/CDR·DVD/VDPVIDEO SELECTSYSTEMSET UP MENURETURN DISPLAYSURROUND98236 7SELECTCH SELECTSYSTEM SETUP buttonPress this to display the system setup on the display.CURSOR buttons (•, ª, 0, 1)Press this change what appears on the display.SELECT buttonPress this to switch the display.Also use this button to complete the setting.• System setup items and default values (set upon shipment from the factory)System setup Default settingsSpeakerConfigurationSubwoofer ModeChannel LevelDigital InputInput the combination of speakers in your system and theircorresponding sizes (SMALL for regular speakers, LARGE for full-size,full-range) to automatically set the composition of the signals outputfrom the speakers and the frequency response.This adjusts the volume of the signals output from the speakers andsubwoofer for the different channels in order to obtain optimumeffects.This assigns the digital input jacks for the different inputsources. InputsourceDigitalInputsFront Sp.LargeCenter Sp. Surround Sp. Sub WooferSmall Small YesFront & Subwoofer Center Surround L & R —12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) —Front L Front R Center Surround RSubwoofer0 dB 0 dB 0 dB 0 dB0 dBDVD/VDP TV/DBSCOAXIAL OPTICAL-1Delay TimeThis parameter is for optimizing the timing with which the audiosignals are produced from the speakers and subwoofer according tothe listening position.Surround L0 dB1 Set the slide switch to “AUDIO”.2 Use the following buttons to set up the system:AUDIOCD MD/CDRVIDEOThis selects the subwoofer speaker for playing deep basssignals. Subwoofer mode = Normal——NOTE:• The system setup is not displayed when “HEADPHONE ONLY” is selected.CDR/TAPEOPTICAL-2