Denon AVR-1905 Operating Instructions Manual

Also see for AVR-1905: Brochure & specs Operating instructions Service manual

Denon AVR-1905 Operating Instructions Manual Manual pdf 20 page image

System setup Default settingsAuto TunerPresets FM stations are received automatically and stored in the memory.A1 ~ A8B1 ~ B8C1 ~ C8D1 ~ D8E1 ~ E887.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 MHz520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, 90.1 / 90.1 MHz90.1 MHz90.1 MHz90.1 MHzF1 ~ F8G1 ~ G890.1 MHz90.1 MHzNOTES:• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. Forexample, if the TV monitor is connected to both the AVR-1905/785’s S-Video and video monitor output jacks and signals are input to the AVR-1905/785 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output withpriority to the S-Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 30.)• The AVR-1905/785’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read smallcharacters on TVs with small screens or low resolutions.• The setup menu is not displayed when headphone are being used.2 Speaker system layoutBasic system layout• The following is an example of the basic layout for a system consisting of 8 speaker systems and a television monitor:Subwoofer Center speaker systemSurround speaker systemsSurround back speaker systemFront speaker systemsSet these at the sides of the TV or screen withtheir front surfaces as flush with the front of thescreen as possible.20ENGLISH