Denon AVR-1905 Operating Instructions Manual

Also see for AVR-1905: Brochure & specs Operating instructions Service manual

Denon AVR-1905 Operating Instructions Manual Manual pdf 30 page image

After setting up the system1 Press the SYSTEM SETUP button to finish system set up.This completes the system setup operations. Once the system is set up, there is no need to make the settings again unless other componentsor speakers are connected to or the speaker layout is changed.Auto Tuner PresetsUse this to automatically search for FM broadcasts and store up to 56 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8, E1 to 8, F1to 8 and G1 to 8.NOTE:• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset itusing the manual “Preset memory” operation.1 Use the CURSOR button to select “Yes”.“Search” flashes on the screen and searching begins.“Completed” appears once searching is completed.The display automatically switches to screen.29 PRESET 2 Press the ENTER or (down) button if you want to start the settings over from the beginning.• On-screen display signalsSignals input to the AVR-1905/785VIDEO signal input jack(yellow)ECEC1234S-video signal input jackEECCVideo signal output to VIDEOMONITOR OUT jack (yellow)CCCEVideo signal output to Color Difference(Component) Video MONITOR OUT jackCCCCOn-screen display signal output(C: Signal E: No signal) (C: On-screen signals output E: On-screen signals not output)Video signal output to S-Video MONITOR OUT jackCCCCNOTE:• When a component video signal is input and when the “Video Input Mode” is set to the component fixed mode at Input setup, the on-screen display is only displayed when the System Setup, Surround Parameters and On Screen buttons are operated.30ENGLISH