Denon AVR-1908 Owner's Manual

Also see for AVR-1908: Specifications Comparison chart Specifications Owner's manual Service manual

Denon AVR-1908 Owner's Manual Manual pdf 42 page image

Set [MODE SELECTOR 1] to “AUDIO” then press[SOURCE SELECT].The desired input source can be selected directly.PRESET CHANNELTUNINGSOURCE SELECT SHIFTBANDMASTER VOLUMEPlaybackAbout the button names in these explanations< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unitPreparations1 Press .The power indicator lights red and the power is set to the standbymode.2 Press or [ON/SOURCE].The power indicator flashes green and the power turns on.Turning the Power Offq Press or [OFF].The power is set to the standby mode.w Press .The power indicator turns off, and so does the power.NOTEPower continues to be supplied to some of the circuitry even whenthe power is in the standby mode. When leaving home for long periodsof time or when traveling, either press to turn off the power,or unplug the power cord from the power outlet.Turning the Power OnEither turn or press [MASTERVOLUME].Operations During PlaybackAdjusting the Master VolumePress [MUTING].To cancel, press [MUTING] again. Muting can also be canceled byadjusting the master volume.Plug the headphones into .The sound from the speakers and pre-out connectors is automaticallycut.NOTEBe careful not to set the volume too high when using headphones.Turning Off the Sound Temporarily (Muting)Listening with HeadphonesSelecting the input sourceOperation on the main unitTurn .If “Rec Select” is selected for the input source, press beforeturning .Operation on the remote control unit[OFF]SOURCE SELECTSHIFT[MODESELECTOR 1][ON/SOURCE]PRESETCHANNELMASTER VOLUME[MUTING][MODESELECTOR 2]0Getting Started Connections Setup Playback Remote Control Amp Assign Information TroubleshootingPress .Switching the front speakersSOURCE SELECTTUNING[MODE][MEMORY][TUNER]BAND[Front][Rear]