Denon AVR-1910 Owner's Manual

Also see for AVR1910 - Multi-Zone Home Theater Receiver: Specifications Specification Capabilites and Compatibilities Service manual Getting started

ENGLISHGetting Started Connections Remote Control Information Troubleshooting SpecificationsMulti-ZoneSettingsPlaying ComponentsUse the RESTORER mode to expand the low and high frequencycomponents of compressed audio files and achieve a richer sound.The default setting is “Mode3” (vpage 48).To check the name of the title, the artist or thealbum when playing in browse mode, press.The time (default : 30 sec) for which the on-screen display are displayed can be set atmenu “iPod Information” (vpage 31). Pressuio p to return to the original screen.Press and set the AVR-1910’s power to thestandby mode before disconnecting the iPod.Also switch the input source to one to whichthe menu “iPod dock” is not assigned beforedisconnecting the iPod.••••4 Press and hold it down for a 2 seconds or more toselect the display mode.There are two modes for display the contents recorded on theiPod.Browse mode ：Displayed on the TV screen.Remote mode ：Displayed on the iPod’s screen.Display mode Browse mode Remote modePlayablefilesAudio file S SVideo file Sz1 Sz2ActivebuttonsRemote controlunit (AVR-1910) S SiPod® A Sz1： When using an ASD-11R, ASD-3N or ASD-3W control dock foriPod.z2： Video may not be output, depending on the combination ofASD-1R or ASD-11R and iPod.5 Use ui to select the menu, thenpress or p to select the music orvideo file to be played.6 Press or p.Playback starts.7 Use to adjust the volume.GVariable rangeH – – – –80.0dB ~ 18.0dB※ The variable range differs according to the input signal and channellevel setting.8 Select the desired surround mode.(vpage 42 “Selecting the Surround Mode”)9 Adjust the desired sound field effects.(vpage 44 “Adjusting the sound Field Effects”)n To stopDuring playback, either press and hold or press .n Stopping playback temporarilyDuring playback, press or .Press again to resume playback.n To cue to the beginning of a trackDuring playback, either press (to cue tothe current track) or (to cue to the nexttrack).n Repeat playback and shuffleplayback“iPod Playback Mode” (vpage 35)iPod is a trademark of Apple Inc., registered in the U.S. and othercountries. The iPod may only be used to copy or play contents thatare not copyrighted or contents for which copying or playback islegally permitted for your private use as an individual. Be sure tocomply with applicable copyright legislation.NOTEDepending on the type of iPod and the software version, somefunctions may not operate.DENON will accept no responsibility whatsoever for any loss of iPoddata.••1 Press and hold to set the Remotemode.“Remote iPod” is displayed on the AVR-1910’s display.2 Watching the iPod’s screen, use uito select “Photos” or “Videos”.3 Press until the image you want toview is displayed.“TV Out” at the iPod’s “Slideshow Settings” or “Video Settings” mustbe set to “On” in order to display the iPod’s photo data or videos onthe monitor. For details, see the iPod’s operating instructions.Viewing Still Pictures or Videos on the iPod®Photo and video data on the iPod can be viewed on the monitor. Onlyfor iPod equipped with slideshow or video functions. (When using anASD-1R or ASD-11R)Video may not be output, depending on the combination of ASD-1Ror ASD-11R and iPod.••FrontFrontFrontFrontFront1 Set to “MAIN/TV” andto “MAIN”.2 Press to select “TUNER”.Listening to FM/AM BroadcastsBasic OperationFrontFrontPlayback