• This function automatically converts various formats of video signals input to the AVR-2309 into theformat used to output the video signals from the AVR-2309 to a monitor.• The AVR-2309’s video input/output circuitry is compatible with the following four types of video signals:Digital video signals: HDMIAnalog video signals: Component video, S-Video and VideoVideo Conversion FunctionGFlow of video signals inside the AVR-2309HHigh picturequality playback HDMI connectorComponent videoconnectorsS-Video connectorVideo connectorMonitorHDMI connectorComponent videoconnectorsS-Video connectorVideo connectorVideo inputterminalsMonitor outputterminals: When 480i/576i signals are inputNOTE• HDMI signals cannot be converted into analog signals.• 1080p component input video signals cannot be output to anything other than component videoconnectors.• 480p/576p, 1080i and 720p component video input signals cannot be converted into S-Video or Videoformat.• When a non-standard video signal from a game machine or some other source is input, the videoconversion function might not operate.• When not using this function, connect a monitor output with the same type of connector as the videoinput connector.• The resolution of the HDMI input-compatible monitor connected to the AVR-2309 can be checked atmenu “Information” – “HDMI Information” (vpage 45).• When viewing HDMI or component video signals via the AVR-2309, the on-screen display appears whenthe MENU button on the main unit or the A.MENU button on the remote control unit is operated.• When only HDMI or component video signals are input to the AVR-2309, the characters of the on-screendisplay are not displayed over the picture.On-Screen Display for Component Video Outputs and HDMIOutputConnectionsSpeaker ConnectionsThe illustration below shows a basic example of installation of the amplifier combined with 8 speakers anda monitor.Speaker InstallationSubwoofer Center speakerSurround speakersFront speakersPlace the front speakers to thesides of the monitor or screen andas flush with the screen surface aspossible.The table below shows a typical speaker configuration for the AVR-2309.Surround back speakersFRONT CENTER SURROUND SURROUND BACK SUBWOOFERL R L R L R 1 speaker7.1-channels(FRONT A+B) S S S S S S S – S7.1-channels S S S S S S S – S6.1-channels S S S S S – – S S5.1-channels S S S S S – – – S3.1-channels S S S – – – – – S2.1-channels S S – – – – – – S2-channels S S – – – – – – –Getting Started Setup Playback Remote Control Multi-zone Information TroubleshootingENGLISH Specifications