Denon AVR-2309 Owner's Manual

Also see for AVR-2309: Owner's manual

Denon AVR-2309 Owner's Manual Manual pdf 16 page image

• Select the terminal to use and connect the device (vpage 9 “VideoConversion Function”).• With HDMI connections, the video and audio signals can betransferred with a single cable.• To output the audio signals to the monitor with HDMI connections,set menu “Manual Setup” – “HDMI Setup” – “HDMI Audio Out” to“TV” (vpage 26).Connecting the Monitor47*%&0*/7*%&0$0.10/&/57*%&0: 1# 137*%&0*/)%.**/ */RLRL47*%&0065"6%*07*%&0$0.10/&/57*%&0: 1 # 137*%&0065 065"6%*0 $0"9*"-0653-065065)%.*MonitorCarefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.Connecting the Playback ComponentsBlu-ray Disc player / DVD playerSelect the terminal to use and connect the device.Blu-ray Disc player / DVD playerNOTE• The component video connectors may be indicated differently onyour monitor. For details, see the monitor’s operating instructions.• The audio signals output from the HDMI connectors are only theHDMI input signals.When using an optical cable for the digital audio connection, make thesettings at menu “Input Setup” – “Assign” – “Digital In” (vpage35).b When connected to a Blu-ray Disc player, and playing Dolby TrueHD,DTS-HD, Dolby Digital Plus HD AUDIO, connect the HDMI.bRecord Player• When connecting a record player with an MC cartridge, use acommercially available MC head amplifier or a step-up transformer.• Induction humming (a booming sound) may be produced from thespeakers if the volume is raised with no record player connected.• With some record players, noise may be generated when the groundwire is connected. If so, disconnect the ground wire.(/%"6%*0065RLTurntable (MM cartridge)NOTEThe AVR-2309’s SIGNAL GND terminal is meant to reduce noise whena record player is connected. This is not a safety ground terminal.Getting Started Connections Setup Playback Remote Control Multi-zone Information TroubleshootingENGLISHSpecifications