Denon AVR-2309CI Owner's Manual

Also see for AVR-2309CI: Product Compatibility Chart Capabilites and Compatibilities Brochure & specs Getting started Owner's manual

Denon AVR-2309CI Owner's Manual Manual pdf 75 page image

Multi-zone OperationsTurning the Power On and OffGOperation on the main unitHPress .When the power turns on, the multi-zone indicator ( ) lights onthe display.GOperation on the remote control unitHPress [ZONE2 ON] or [ZONE2 OFF].Selecting the Input SourceGOperation on the main unitHq Press and select the zone to be adjusted.w Turn .GOperation on the remote control unitHq Set [SOURCE CONTROL 1] to “AUDIO” and [SOURCE CONTROL 2]to “ZONE2” (main remote control unit).w Press [SOURCE SELECT].Adjusting the VolumeGOperation on the main unitHq Press and select the zone to be adjusted.w Turn to adjust.GOperation on the remote control unitHq Set [SOURCE CONTROL 1] to “AUDIO” and [SOURCE CONTROL 2]to “ZONE2” (main remote control unit).w Press [VOLUME]. [SOURCECONTROL 1][SOURCECONTROL 2][SOURCESELECT][VOLUME][MUTING][Variable range] – – – –70dB ~ –40dB ~ +18dB• The volume can be increased up to the value set at menu “ManualSetup” – “ZONE2 Setup” – “Volume Limit” (vpage 35).• The ZONE2 volume can be adjusted only when “ZONE2” is selectedat menu “Manual Setup” – “Option Setup” – “Amp Assign”(vpage 35).Turning off the Sound Temporarilyq Set [SOURCE CONTROL 1] to “AUDIO” and [SOURCE CONTROL 2]to “ZONE2” (main remote control unit).w Press [MUTING].The sound is reduced to the level set at menu “Manual Setup”– “ZONE2 Setup” – “Mute Level” (vpage 35).To cancel, either adjust the volume or press [MUTING] again.The setting is canceled when the zone’s power is turned off.The source selected for ZONE2 is also output from the recordingoutput connectors.NOTEDigital audio signals input from the COAXIAL, OPTICAL or HDMIconnectors cannot be played in multi-zone.(Main remote control unit)[SOURCE SELECT][MUTING][ZONE2 OFF] [ZONE2 ON][VOLUME](Sub remote control unit)[ZONE2 ON][MAIN ON][MAIN OFF][SOURCESELECT][ZONE2 OFF]• Also press [SOURCE SELECT] when in standby mode, the powerturns on.• When using ZONE2, it is possible to turn the power for the MAINZONE only on or off by pressing [MAIN ON] or [MAIN OFF].[Front] [Rear]Button located on both the main unit and the remote controlunit BUTTONButton only on the main unit