Denon AVR-3310CI Owner's Manual

Also see for AVR-3310CI: Specification Capabilites and Compatibilities Owner's manual Before Upgrading Guide Getting started

Contents

Denon AVR-3310CI Owner's Manual Manual pdf 87 page image

Getting Started Connections Settings Playback Remote Control Information Troubleshooting SpecificationsPlaying in ZONE2/ZONE3 (Multi-zone Function)This function allows you to play sound in rooms other than the mainzone where multi-channel sound is played.Connecting and Setting the SpeakersAmp Assign modesetting (vpage 34) andthe audio signals thatare outputConnecting the speakersZONE2ZONE2Output signal :Stereo (L / R)w q w qZONE2ZONE3ZONE3Output signal :Stereo (L / R)w q w qZONE3ZONE2andZONE3ZONE2(MONO)Output signal :MonauralZONE2 ZONE3w q w qAudio OutputThere are two methods to do this, as described below. Choose oneof the methods.q Zone playback by speaker outputw Zone playback by audio output (PRE OUT)Use an external amplifier.The ZONE2 and ZONE3 audio signals are output from the AVR-3310CI’s SURR BACK/AMP ASSIGN speaker terminals using theamplifier assignment function.The source selected for ZONE2 is also output from the recordingoutput connectors.NOTEWe recommend using high quality pin-plug cables for audioconnections in order to prevent noise.When the input source to which the digital input connectors(OPTICAL/COAXIAL) are assigned is selected in ZONE2 or ZONE3,playback is only possible if the digital signal being input is in PCM(2-channel) format.It is not possible to play the digital audio signals input from the HDMIterminals in ZONE2 and ZONE3.When certain digital signals are being input, noise may be outputfrom the ZONE2 and ZONE3 audio output connectors.••••Audio Connections (ZONE2, ZONE3)The audio signals of the AVR-3310CI’s ZONE2 and ZONE3 audiooutput terminals are output to the ZONE2 and ZONE3 amplifiers andplayed on these amplifiers."69*/"69*/RLRLAVR-3310CIMAIN ZONEZONE2Also be sure to read the operating instructions of the connecteddevices.ZONE3Multi-zoneVideo OutputThe video signals of the AVR-3310CI’s ZONE2 video output terminalare played by the ZONE2 TV.7*%&0*/7*%&0;0/&NOTEIt is not possible to output video signals input to the HDMI orcomponent terminals to ZONE2.MAIN ZONEAVR-3310CIq Zone Playback by Speaker Outputw Zone Playback by Audio Output(PRE OUT) Video Connection