Denon AVR-3805 Operating Instructions Manual

Also see for AVR-3805: Control protocol Service manual Service manual Operating instructions Operating instructions

Contents

71[1] Outputting a program source to an amplifier, etc., in a different room (ZONE2, ZONE3 mode)1 Press the “ON” button.3 With “ZONE2 SOURCE” displayed, turnthe FUNCTION knob and select thesource you wish to output.• The display switches the selectedsource.4 Start playing the source to be output.• For operating instructions, refer to the manuals of therespective components.32 1Z O N E 2 S O U R C EF U N C T I O NNOTES:• The signals of the source selected in the ZONE2 mode are alsooutput from the VCR-1, VCR-2 and CDR/TAPE recording outputjacks.• Digital signals are not output from the ZONE3, audio (FIXED-OUT) output jacks and ZONE2 audio output jacks.• Refer to page 69, 70 about the MULTI ZONE connections.(Main unit)(Main unit)2 Press the ZONE2/3/REC button.The display switches as follows eachtime the button is pressed.(Main unit)51242 Press the “SOURCE ON” button.To turn off the ZONE2 mode, pressthe ZONE2 “SOURCE OFF” button.(Remote control unit)3 Press the input source button• The ZONE2 source switches directly.4 The output level of the ZONE2 OUTterminals can be controlled using theVOLUME + and - buttons on the remotecontrol unit.The output level of ZONE2 OUT can becontrolled only if ZONE2 vol. level is set“Variable” at Zone2 Control in SystemSetup Menu. (see page 45,46)(Remote control unit)DEFAULT SETTING (ZONE2 VOLUME LEVEL) :- - - dB (MINIMUM)5 When the ZONE2 SOURCE function isset to TUNER, the preset channel canbe selected using the CHANNEL + and- buttons on the remote control unit.(Remote control unit)[2] Remote control unit operations during multi-source playback (selecting the input source)1 Select “ZONE2” using the ZONE2/ZONE3button.(Remote control unit)This operation is not possible in the REC OUT mode.NOTE:• The main zone output can be turn on and off “SOURCEON/OFF”button (AMP mode)ZONE2(RECOUT)ZONE3• ZONE3 can also be set with a method similar to the above.• ZONE 3 can also be set with a method similar to the above.