Denon AVR-4308 Owner's Manual

Also see for AVR-3808: Owner's manual Control protocol Owner's manual Service manual Service manual

Contents

11GUI Menu Map Setup Information TroubleshootingENGLISH1 Press and hold [SEARCH] to set the Remote mode.“Remote iPod” is displayed on the AVR-4308 / AVR-3808’sdisplay.2 Watching the iPod’s screen, use ui to select“Photos” or “Videos”.3 Press ENTER until the image you want to view isdisplayed.• “TV Out” at the iPod’s “Slideshow Settings” or “Video Settings”must be set to “On” in order to display the iPod’s photo data or videoson the monitor. For details, see the iPod’s operating instructions.• When unable to operate by the remote control unit, use the iPodunit.Viewing Still Pictures or Videos(Remote mode)Photo and video data on the iPod can be viewed on the monitor.(Only for iPod equipped with slideshow or video functions.)PlaybackOther Operations and Functions3-065015*$"-065"6%*0"6%*0RLRL065)%.**/)%.*Convenient FunctionsHDMI Control FunctionWhen AVR-4308 / AVR-3808 is connected to a TV and player compatible with HDMI control function, you can perform the followingoperations.Settings other than AVR-4308 / AVR-3808 settings must be made on the respective devices. (Check the operating instructions of eachdevice for details.)NOTE• When using the HDMI control function, you can not assign HDMI input to “TV/CBL” by setting “Source Select” – “(input source)” – “Assign”– “HDMI” in the GUI menu.• If you set “Control” to "ON", the “HDMI” and “Digital” assignment in “Source Select” – “Assign” (vpage 6, 7) under the GUI menuchanges.• When “HDMI Control” is set to “ON”, the digital input connector assigned to ”TV/CBL” changes to “Optical3”.• When you want to listen to TV audio by AVR-4308 / AVR-3808, connect optical digital oranalog.If the TV you are using has both connectionjacks, use the optical digital connection.• When using these functions set as follows:GUI menu “Manual Setup” – “HDMI Setup”– “HDMI Control” – “Control” set to “ON“(vpage 5).• AVR-4308 / AVR-3808 power off can be linkedto the TV power off step.When you set “Output audio from amp” inthe TV audio output setup operation, you canswitch the amp power on.• You can switch audio output devices with aTV operation.(When outputting from the TV speakers,output switches from speakers connected toAVR-4308 / AVR-3808.)• You can adjust AVR-4308 / AVR-3808 volumein the TV volume adjustment operation.• You can switch AVR-4308 / AVR-3808functions through linkage to TV input functionswitching.• When playing the player, the AVR-4308 / AVR-3808 input function switches to the functionof that player.ConnectionsPlayer compatiblewith HDMIcontrol functionTelevision compatible withHDMI control function : AVR-4308>